MODIFIED C5 HYDROCARBON RESIN WITH LOW Tg, WIDE COMPATIBILITY WITH
SIS,SBS,EVA AND OTHER POLYMERS, USED FOR RUBBER BASED PSA.
C5/C9 HYDROCARBON RESIN C-2130 FOR ADHESIVES AND RUBBER COMPOUNDS
MELT VISCOSITY (200°C)
Max 350 mPa·s
Max 0.3 mgKOH/g
Specific gravity ,@25℃
Wax Cloud Point(°C)
BITONER C-2130 is low molecular weight, light yellow C9 modified C5
Characterized by excellent compatibility with natural and most
synthetic rubbers and with EVA copolymers.
C-2130 is a resin suitable to be used as tackifiers for adhesives
Hot Melt Adhesive,Sealants,PSA,Rubber Compounds
4. Key Characteristics:
· Excellent compatibility with NR,most synthetic rubers and EVA
· Low Molecular weight
· Low volatility and low odor
· Good heat stability
25kgs net Kraft Paper bag or 500kgs/1000kgs in bulk bags.
6. Storage and Transport
Store away from sources of heat or ignition;
Store in a cool place away from direct sunlight;
Store away from oxidising agents;
Store containers securaly sealed and protected against damage.
C5 hydrocarbon resin, C5 petroleum resin,aliphatic hydrocarbon